VSYS VSSB-49 Universal Soundbar Bracket for 20"–45" Soundbars, 15 kg. A pair of brackets that gets the soundbar off the shelf and onto the screen where it belongs.
A wall-mounted display and a soundbar sitting on a credenza two metres below it is a compromise nobody actually chose. The VSYS VSSB-49 removes it. The pair of brackets bolts straight onto the display's existing rear VESA holes, so the soundbar travels with the screen, sits at the correct acoustic height and needs no additional holes in the wall. Smart-Boards supplies it across the GCC and Africa alongside our full VSYS mounting range, with quotations and low-cost delivery to your country.
It takes soundbars from 508 mm to 1143 mm wide (20" to 45") and up to 15 kg, and the depth holders adjust between 40 mm and 182 mm so slim and deep bars both grip firmly. Profile adjustment runs from 77 mm to 215 mm and the height is adjustable too, which lets you close the gap between the screen and the bar to almost nothing. The bracket can be fitted above or below the display depending on cable routing, and it tilts up to 10 degrees while keeping an anti-tip hold on the soundbar.
Key features
- Mounts to the display's own VESA holes - no extra wall drilling beyond the display mount itself
- Fits soundbars 508 mm to 1143 mm wide (20" to 45") and up to 15 kg
- Adjustable depth holders take bars from 40 mm to 182 mm deep with an anti-tip grip
- Fit above or below the screen, whichever suits the room and the cable run
- Profile adjustment of 77 mm to 215 mm plus height adjustment for a near-seamless gap
- Tilts up to 10 degrees while still holding the soundbar securely
- Steel and powder-coated construction, supplied as a matched pair with all hardware
- Supplied, shipped and supported by Smart-Boards across the GCC and Africa
| Brand | VSYS |
|---|---|
| Height adjustment | Adjustable, sets the gap between screen and soundbar |
| In the box | 2 x soundbar brackets, VESA mounting hardware, adjustable depth holders, installation guide |
| Material | Steel and plastic, powder coated |
| Max load | 15 kg |
| Mounting position | Above or below the display |
| Mounting type | Soundbar bracket pair, VESA mounted to the display |
|---|---|
| Profile adjustment | 77 mm to 215 mm |
| Soundbar compatibility | 508 mm to 1143 mm wide (20 inch to 45 inch), 40 mm to 182 mm deep |
| Tilt range | 10 degrees, anti-tip grip maintained |
| Vesa pattern | Uses the display's existing rear VESA mounting holes |
| Model | VSSB-49 |
How do I get a price for this product?
Do you deliver across the GCC and Africa?
Do you offer installation and setup?
Is there a warranty?
Can I order in bulk for schools or offices?
1. What is the VSYS VSSB-49 Universal Soundbar Bracket?
It is a pair of brackets that attach to a display's rear VESA holes and hold a soundbar directly above or below the screen. It carries bars up to 15 kg and from 20" to 45" wide.
2. Is it compatible with my display and soundbar?
Yes - any display with standard rear VESA holes will take it, and the soundbar needs to be 508-1143 mm wide, 40-182 mm deep and 15 kg or less. Tell us your display and soundbar models when you request a quote and we will confirm the exact fit.
3. Does it need extra holes in the wall?
No. It shares the display's VESA fixings, so nothing new goes into the wall. If the screen is on an articulating or tilting mount, the soundbar simply moves with it.
4. Can it go above the screen instead of below it?
Yes. Either position works. Above is often the better choice where a credenza or a wall box sits under the screen, or where the cable run comes down from the ceiling.
5. Will a deep soundbar still sit securely?
Yes - the holders adjust from 40 mm to 182 mm of depth and grip the bar rather than just resting it, so it stays put even with the bracket tilted 10 degrees.
6. Do you ship the VSYS VSSB-49 across the GCC and Africa?
Yes. Smart-Boards ships to every GCC and African country at the lowest possible cost through established logistics partners. On-site installation is available within the UAE; elsewhere the product arrives ready for local setup.
7. How do I get a price for the VSYS VSSB-49?
Pricing is on request. Send a quote request from the product page or email info@procure.ae and we return a procurement-ready quotation, including education and bulk pricing.
8. Is installation included?
Within the UAE, yes - our team can install and set up the unit, usually at the same time as the display mount. Outside the UAE we ship it ready for local installation and provide setup guidance on request.
9. Is there a warranty and after-sales support?
Yes - the VSYS VSSB-49 comes with manufacturer warranty plus Smart-Boards after-sales support for the GCC and Africa.
10. Can you supply large quantities for a rollout?
Yes - Smart-Boards handles multi-unit rollouts across the GCC and Africa, with volume pricing and procurement-ready documentation for tenders and education projects. It is a common add-on line when a meeting-room programme standardises on a display plus soundbar package.
Request a quote: email info@procure.ae or call +971 4 546 5041. Smart-Boards - GCC & Africa supply, shipping and UAE installation.
Delivery across the GCC & Africa
We ship to the UAE, Saudi Arabia, Qatar, Kuwait, Bahrain, Oman and across Africa at the lowest possible cost through established logistics partners. Lead times and freight are stated clearly in your quotation.
On-site installation in the UAE
Professional installation, mounting and configuration are available within the UAE. Outside the UAE the product arrives ready for local installation, with remote setup guidance from our team.
- Export-grade packing and transit insurance
- Procurement-ready documents for tenders and projects
- Wall mount or mobile stand fitting (UAE)
- Manufacturer warranty, optional annual maintenance contract
Ready to equip your space?
Get a tailored quote for the GCC & Africa — pricing, availability and project support in one reply.